vyatta installation

vyatta@vyatta:~$ install image
Welcome to the Vyatta install program.  This script
will walk you through the process of installing the
Vyatta image to a local hard drive.
Would you like to continue? (Yes/No) [Yes]: <Enter>
Probing drives: OK
Looking for pre‐existing RAID groups...none found.
The Vyatta image will require a minimum 1000MB root.
Would you like me to try to partition a drive automatically
or would you rather partition it manually with parted?  If
you have already setup your partitions, you may skip this step.
Partition (Auto/Parted/Skip) [Auto]: <Enter>

I found the following drives on your system:

 sda    1074MB

Install the image on? [sda] <Enter>

This will destroy all data on /dev/sda.

Continue? (Yes/No) [No]: Yes<Enter>

How big of a root partition should I create? (1000MB ‐ 1074MB) [1074]MB: 

<Enter>

Creating filesystem on /dev/sda1: OK

Done!

Mounting /dev/sda1...

What would you like to name this image? [VSE6.4‐2012.03.09]: <Enter>

OK. This image will be named: VSE6.4‐2012.03.09

Copying squashfs image...

Copying kernel and initrd images...

Done!

I found the following configuration files:

/config/config.boot

/opt/vyatta/etc/config.boot.default

Which one should I copy to sda? [/config/config.boot]: <Enter>

Copying /config/config.boot to sda.

Enter password for administrator account

Enter vyatta password:vyatta(enter your password)

Retype vyatta password:vyatta

I need to install the GRUB boot loader.

I found the following drives on your system:

 sda    1074MB

Which drive should GRUB modify the boot partition on? [sda]: <Enter>

Setting up grub: OK

Done!

vyatta@vyatta:~$

reboot the system and remove cd